View source for B1 Bass Module as Subwoofer

<noinclude>[[Image:B1Bass.gif|right]]</noinclude> 
{{Classic icon}} {{Model I icon}} {{Model II icon}} Question - Can I use a B1&nbsp; with an amplifier as a subwoofer for another (non-L1®) loudspeaker system?<br> 

:The {{B1}} is designed to work with the {{L1}} system. The B1 is protected from frequencies it was not designed to handle - but only when connected to an {{L1}} Power Stand.&nbsp; If you connect the B1&nbsp; to another amplifier, or an {{A1}}&nbsp; use a Power Stand Bass Line Out as the source. If you do not, there is no protection for the B1.<br>

Note from MikeZ-at-Bose<br> 

:Loudspeakers designed to be used with other gear (typical 2 way PA speakers, third party subs, etc.) usually have some sort of passive protection built into them. The B1, since it was designed to be used with L1's, has no protection. All of the protection is built into the L1 itself.<br>

— [http://bose.infopop.cc/eve/forums/a/tpc/f/3976055944/m/3991007495?r=8491031595#8491031595 Using B1-s with conventional speaker system]<br> 

Notes:

On the {{Classic}} there is an input "All Amps In". There is no protection for the B1s when using this input.<br> 

The {{A1}} is a full range amplifier and does not offer any protection for the B1s. The B1s will be protected if the signal source is an {{L1}} Power Stand Bass Line Out.<br> 


; Can I use the B1s with Bose&reg; Panaray 802 loudspeakers?

:You'll need to EQ the B1s to get them to sound at their best. The 802s go down to 60 Hz on their own. The B1s will go down to 40 Hz, but you'll need a crossover to get all the pieces working in their optimal range. Bose recommends the [http://worldwide.bose.com/pro/en_us/web/controlspace_sp_24_sound_processor/page.html Controlspace SP 25 Sound Processor] for all Panaray loudspeaker systems.

You can call Bose Technical support. for more details.... there are a lot of details.

{{Support}}



----

<br> 

[[Category:B1]]