View source for Mixer to ToneMatch Mixer

Connect a third party mixer with left and right outputs to your {{ToneMatch Mixer}}.  You can use two of the main channels ({{T4S}} channels 1, 2, 3, 4 or {{T8S}} channels 1, 2, 3, 4, 5, 6, 7, 8. 


==Main Channels 1, 2, 3, 4 (,5, 6, 7, 8)==

If you connect the third party mixer to the main channels you can use:

*    The Master Volume control
*    The Pan/Aux to direct the signals to left and right outputs
*    The trim controls to optimize the signal output from the mixer to match the inputs of the T4S
*    The channel volume controls
*    Presets (e.g., DJ / High Volume Music)
*    zEQ  (tone controls)
*    ParaEQ  (parametric EQ)
*    Reverb
*    Aux Outputs
*    XLR to XLR cables OR XLR to 1/4" (6.3mm) Tip-Ring-Sleeve jack cables


==Aux Inputs 5, 6 (9, 10 (T8S)) ==

If you connect the third party mixer to the Aux inputs you can use:


*    The Master Volume control
*    The Pan/Aux to direct the signals to left and right outputs
*    XLR to 1/4" (6.3mm) Tip-Ring-Sleeve jack cables



Choose the channels that best suit your needs.

==Summary==

*   If you need signal processing use two of the main channels
*   If you will do all the signal processing and manage the volume on the third party mixer, you can use the Aux inputs

----
[[Category:T4S]]
[[Category:T8S]]
[[Category:Mixer]]
[[Category:DJ]]