View source for Introducing Performers to the Bose System

{{Editorial}}

Here is how I introduce new players to the system. I wrote this to describe what I do for festival situations and open stages. I hope you find some ideas that work for other situations too. This originated as a post on the Bose Musicians Forum

=== If They Trust You ===

If the performers are used to trusting the sound man, that is: they just want to walk in, plug in, and play... you may have a little difficulty getting them to take the reins (control the remote).

If they are used to trusting *you* then things should go smoothly.

To be prepared for people who just want to walk in and play the old way... Have a conventional mixer wired up with mains out running to your two** systems (channels 3/4). You might want to do this for line-level instruments anyway.
** Ron, for whom I originally wrote this was contemplating 2 Systems.

That's your backup plan. BUT

This is what I do with open stage situations with guest artists. It sounds like it would take awhile, but really we're talking just a couple of minutes.

I setup the Bose systems as though there was no mixer. That is:
* microphones into channels 1/2 on each system
* DI's to the remaining channels 3/4 open on each system.
* Remotes wired and attached to the mic stands

=== Soundcheck ===

=== Introducing Performers to the System ===
But before getting into a lot of detail, I just get the gain staging setup in the conventional way. (all volume controls on the remote at zero). This is the time to set the presets for people who have brought their own mics. While I'm doing that I'll point out that all the sound is coming from the Bose systems and that there will be no need for monitors or a separate house mix. That is: Everyone, the performers and the audience will be listening to the [[Hearing the Same Thing|same sound source]].

=== How does this thing work? ===
Time for a quick tutorial about feedback, covering mic angle, positioning and how the system is unlikely to feedback as long as you don't leave an open mic pointing directly at the L1.

=== Bring on the sound (one unit at a time) ===
Turn up the master to just under 1/2 way and get the performers to turn up the individual channels. Encouragage them - this is *you* in control of *your* sound. Get them to try the other tone controls, and let them get used to the buffered response to the controls. Assure them that what they hear is what is being heard in the house.

If there are concerns - "it seems dry" reassure them that when we bring up the master volumes, they will hear all the natural reverb from the room as it responds to them at performance levels.

=== Bring on the feedback ===
With the master volumes at a relatively low level (under 1/2)
I warn the performers and then I'll actually induce some feedback by repositioning a microphone (pointing it at the L1). Then we make it go away by tipping the mic back to a better angle (typically upwards). I hand someone a mic and say "here, you try it." You can also show them that if they leave the system in feedback mode, the system will mute it in a few seconds.

Okay - we've tested the worst case scenario and know how to deal with it.

=== Bring up the volume ===
Okay: we've got the balance between the players and instruments sorted out, and the performers are comfortable with setting their individual levels in the mix. It's time to bring up the master volumes to suit the house.

Give the performers a chance to do their soundcheck song(s) and adjust as necessary. 

Up to this point I have been talking with an individual musician.

=== Mixing Live ===
If working with a group of musicians who are new to the {{L1}} approach, then it is time to talk about mixing. It could be just a few examples:

* If you can't hear the vocals, turn down.  
* If you can't hear the solo, turn down. 
* If it's your solo, the others get to work with you, to feature the solo. 
* Featuring the Solo: 
**  Let the vocalist or soloist set the volume for the band.
**  (repeating) "If you can't hear the solo, turn down."

There is a lot more you could say about this, but I try not to overwhelm people with higher order thinking at this point. You can explain that it's like mixing an album live.  Or, that it's like an old school acoustic jam but louder.

=== On with the show! ===
If all went well up to this point - you're good to go.

=== Plan '''B''' (ackup) ===
If someone just doesn't want to deal with it ("what are they paying *you* for?" (mister sound-guy)) then just plug the mics into the mixer, set the levels and go for it the slightly more conventional way).

It takes only a few minutes to go through the whole procedure and I've found that it's well worth it. But if you try to skip any of the steps, you could have an unhappy performer on your hands.

=== Successful outcome report ===
I recently worked with a true road warrior who immediately picked up on the system. He then did his performance without a hitch. [http://bose.infopop.cc/eve/forums/a/tpc/f/1506041054/m/4121083901?r=4121083901#4121083901 Read about it here...]

== Audience Response ==
The following is an excerpt from a gig report - [[Gig Report / 8 Live Acts 7 Hours]] and speaks to working with audience criticism.

{{#lst:Gig Report / 8 Live Acts 7 Hours|AudienceResponse}}


This was originally posted
[http://bose.infopop.cc/eve/forums/a/tpc/f/1506041054/m/5241075011/r/4561056011 About to get my first 2...]
[http://bose.infopop.cc/eve/forums/a/tpc/f/1506041054/m/8891056011/r/8891056011 Introducing Performers]
----

[[Category:Editorial]]
[[Category:Application Note]]
[[Category:Festival Sound]]
[[Category:Gig Report]]
[[Category:Performance]]