View source for PS1 Powerstand Connections/Line Out/Insert

{{Model I icon}}{{Classic icon}}
== Line Out from Insert Point ==
* access from the "ring" connection at the Insert Point
* post trim
* post {{R1}} Channel Level

For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the [[Half Insert]] method. For more information about 1/4 cables see [[TRS|Tip Ring Sleeve connections]]. The rectangular box shown below the input panel is a [[DI]], used to output the signal to a console or house system.

[[Image:PS1LineOutInsert.jpg]]


----
<references/>
 

[[Category:L1™ System]]
[[Category:PS1 Powerstand]]
[[Category:PS1 Powerstand Connections]]
[[Category:Model I]]
[[Category:Classic]]