Stage Layouts / Soloist with a Guest

2008-12-01T21:10:19Z

SitvaRtrou: liccdelolo

acchiolopas
__NOEDITSECTION__
<table><tr>
<td valign="top" width="250">__TOC__</td>
<td valign="top">[[Image:SoloistPlusGuest.png|Soloist with a Guest]]
You are a solo artist singing and playing Guitar through your {{Model I}} or {{Classic}}. What do you do when you have an occasional guest. This model of the L1™ has two combination microphone/line inputs with Presets so how do you add more inputs for the guest. Here are some ideas on how you can use a mixer.
</td>
</tr></table>

== Solo Setup ==
This is about as simple as it gets. You are running your vocal microphone into Channel 1 and your Guitar with a pickup to Channel 2. You are using appropriate [[Presets]] or each one.

[[Image:2914-02-ST.png]]

== Add a Mixer for the Guest ==
If you want to keep your original setup and just add a mixer and have your guest connect directly to it. Then run the mixer output to the Power Stand Channel 3 or 4. You will probably want to pan the mixer inputs hard to one side (for example: Left) and take the output from the same side (again: the Left output) and connect that to the Power Stand.

[[Image:2915-02-ST.png]]
=== Advantages ===
* You don't have to change the way *you* do things to accommodate your guest.
* The guest has complete control over his/her sound (except that you retain control over the Master Level)

=== Disadvantages ===
The guest cannot use the Presets in the Power Stand. To share the benefit of the Presets with the guest see [[Mixer to Share Presets]]

----
[[Category:Stage Layouts]]

Bose Portable PA Knowledge - User contributions [en]

Stage Layouts / Soloist with a Guest